R2-Tree2

As I mentioned previously in Shattered Memories, we have numerous trees. One of which has the ornaments the kids have made over the years. We never really had a topper for it. Putting a Santa hat or a top hat on it to try and finish it.

This year, I 3D printed a new topper. It was a fun one based on my favorite fandom- Star Wars. I decided to paint it in traditional Christmas colours- red and green with a hint of dark gold.

Our middle daughter had been waiting for over a week to put the tree topper up. Each one of our kids gets to put the topper on a tree. We rotate which tree every year. The kids’ tree was hers this year.

Now it is completed. And looking good thanks to the 3D files from Mr Baddeley’s Printed Droid.

Happy Life Day everyone!

The Future is Now

2020 may be a lot of things to a lot of people. It has certainly been a unique journey. For my family and I- it has meant skyrocketing into the future.

My wife was already working for Shopify for a while before Covid restrictions came into play. She was working remotely and had a good handle on things like Zoom meetings and Google Docs. She was able to help out teenagers get used to the “new normal.”

This summer I got my first 3D printer. I have enjoyed printing a bunch of plastic stuff. All it takes is a file and a spool of filament to create something from almost nothing. It’s not just doing the printing, I’ve also enjoyed painting the items and adding mechanisms to create movement. Robotics and electronics have been brought back into my world after a near three decade hiatus.

This past weekend we entered a new level of futuristic lifestyles. For my wife’s birthday, I picked up an Oculus Quest 2 VR headset for her. Immersing oneself into the virtual worlds is mind boggling to say the least. From active games like Beat Saber to simply painting in a 3D world- this is possibly one of the greatest escapisms I have ever seen.

As the winter arrives and 2020 draws nearer to the end, I for one have enjoyed more of this year in captivity than I expected. We even adopted another dog- Maki who entered our lives right when we needed her to.

How do you feel about technology these days? Are we moving too fast, or too slow? Let me know in the comments.

If You Can’t Find It- Make It

For a couple of years I have been searching out a specific type of clip to hold my outdoor Christmas lights. I always remember to look for them when the season starts at the various stores. But I haven’t seen them in almost three decades. It was when we first moved in that I had used the few we had left over as well as a clip that was close in shape. That clip was far more flimsy, almost intentional so I would need to replace them more often.

The Christmas light clip a simple design. The wires go through the zigzag and hold in place. I like how sturdy these clips are. Unlike the other ones I picked up that have snapped over the years, leaving my lights dangling down. This design was one my father had picked up back in the 90’s.

Because I was unable to find the clips in the store or online, my wife suggested I 3D print them. Brilliant! I went on Thingiverse and someone had uploaded exactly what I needed! I was so happy! So many exclamation marks!!! But in order to make them sturdy, I couldn’t speed up the print. 33 minutes it takes to print one. I need close to twenty replacement pieces. Good thing Christmas is a few weeks away.

As I searched online for the clips, I was in the middle of printing off another great item that will make life easier. I also didn’t know I needed it until I saw it…

I printed a battery dispenser for all my loose “AA” batteries. It holds 12 batteries in the lower part, and has a separate extension to hold more. Now instead of searching the junk drawer the batteries will have a happy little home and I can see when we get low..

Having a 3D printer is fun and has become very versatile in my day to day use. I wonder what else I should print?

BB-R2

I finally did it! I built an R2-D2 on my own. Sort of. I mean, it sure looks like an astromech droid. Only on a smaller scale. For ages, I wanted a 3D printer in order to build a life size R2-D2. But I needed to start smaller so as not to get discouraged.

I found a group on Facebook that creates droids for the 3D printers. They also offer plenty of advice for electronics, sound and lights to one another. You can join the group on Facebook and support the Patreon at Mr. Baddeley’s Printed Droid if you are interested.

I printed the parts over the past month in between all the other projects I had. My little droid was starting to come together.

Last week, I finished painting the droid. I used some acrylic paints that I had on hand. The metallic blue and silver completed the look and made it obvious that it is a droid. After my painstakingly careful paint job, I gave it a clear coat to seal the paint.

After weeks of waiting for parts off Amazon, I was finally able to assemble the droid over the weekend. I’m proud to say that my BB-R2 is completed. I added a remote control to it and he now moves and spins his head. Check out the short video below:

I’m extremely happy with the results. The files for this droid were top notch! I’ve learned a few things from this assembly… like patience, time and money are required… In January I plan on starting my full size droid. We shall see how long that takes. And whether my wife’s patience wears thin.

Staycation- All I Ever Wanted…

Today I am starting my 11 day vacation. I booked this time off in January as a “back-up” trip to Disneyland when I realized that July’s trip may get affected. And July’s trip did get affected. But so did my back-up dates. So now I am having a Staycation.

Today will be an ever increasing lazy day of sleeping and napping. Over the next few days the rest of my family still has school, online courses and work. I will have the freedom to do whatever I want. You know what that means…

That means time to get really invested in my 3D printing! Download files, prepare the files, print the files, curse that there is a failure, reprint the files, sand the print, paint the print, sand the print, paint, assemble the print, print another file, fail at that and reprint it… the list goes on. But I will have all the time in the world (or at least daylight hours) to work on my prints.

Since I am a Star Wars fan- I actually intend to print a life size droid. This week will give me a good jumpstart on my first one. I suspect it will take me the better half of the year to really get an R2 unit put together. So I may start with something smaller or easier. Yes- I plan on having a few droids built. Don’t tell my wife.

Having time for me is going to be nice. It’s been a very long time since I’ve really focused on what I want. Usually I put the family first and enjoy the ride. We will still hang out this weekend together, but during the week- that will be my time. Or rather, my 3D printer’s time.

More 3D Printing

Yes folks, I am obsessed with this 3D printer. Sorry as well that I’m so excited about the stuff I’ve made. To be honest, the first few things weren’t for me.

After the First Fails and Finished mask straps, I went on to do a longer print. This next print took a little over 9 hours to do. It used 95 grams of plastic- about $3 to create. It is a cotton swab holder for my wife’s make up use.

Next I printed a couple of items for my coworker’s Tesla. This took about three hours to create. Now it is on to more important prints!

Having a 3D printer seems a bit extravagant. So naturally I went with a Bruce Wayne idea: a couple of Batarangs for my first movie prop. Fairly easy file to print. I’m in the process of doing the sanding, followed by primer, then more sanding, followed by primer, etc… until it is finally completed.

I’m not just a nerd anymore.

I’m Batman.

3D Printer Part 3: Wanting More

My list of possible 3D builds keeps growing. My family and a few friends have some requests that I plan on making. I also plan to do some 3D prints for donating to people’s betterment.

For me- I mostly want to do movie prop replicas. There’s something profound about building and owning a piece from a film. To me it feels as if I am a part of something bigger.

It also hits the nostalgia feels. I mean, honestly- who wouldn’t want a Proton Pack to fight ghosts back in the 80’s? Or open a can of shaving cream to find dinosaur embryos? Or find out who really shot first when you hold a Han Solo blaster?

I worry that it’ll be a rabbit hole of unfinished projects and a desire to own bigger and better printers. From the forums I am on, it seems that is the way of the 3D modeler. I have already been obsessing about getting another print going. I just need to wait for my spools of plastic to arrive.

I always love creating and making things to display and show off for fun. I shall accept my fate for my new found hobby. I only hope my wife and family also accept this burden I have bestowed upon myself.

You have been warned! When I obsess about something, I beat it into the ground. Just like a new song that I like. It falls into repeat for weeks on end. Or perhaps this will be similar to my love of disco. A variety of fun dance moves and love songs.

From Fails to Finished

Yesterday I set up a workspace for the 3D Printer I received the other day. Actually, my wife allowed me to use a small corner of her studio where she makes her wonderful hats. Check out her website- Ningen Headwear for some great winter hats!

I spent a good couple of hours leveling the bed, installing software on our computer, and getting a couple of designs ready to print. The first test design was a thank you to my wife for use of her space. She had made some face masks and wanted one of these to try out. It was technically “Headwear” related- Surgical Mask Strap. I figured it was an easy print and wouldn’t take very long.

Boy was I wrong.

After about half a dozen failed attempts just starting, I eventually got a print that was not at all what it was meant to be. It was missing some layers. Back to the Internet and YouTube to figure out my issue. Turns out I hadn’t set the proper parameters for my brand of printer.

A couple tweaks and we had a successful first print! Followed by two more successes! I could really get addicted to this feeling of accomplishment. But now I am out of my spool of plastic. Time to wait for the Amazon order to arrive. During that time, I plan on getting some more files downloaded and ready to print.

I see how this could become a love/hate relationship with a 3D printer.

3D Printer Part 2: Building On The Obsession

Back in May 2018, I wrote about wanting a 3D Printer. 3D Printer Part 1: The Obsession It really did become an obsession. Where I joined numerous Facebook groups, watched tons of videos reviewing 3D printers, even got so far as putting one in my Amazon Cart. But I could never get myself to own one.

Until Now.

A few weeks back I was talking with my friend, Matt Harding about how I still want a 3D printer. Turned out he has a coworker that was also enjoying 3D printing. So much so that he owns numerous printers. His coworker also had one that he was kind enough to donate to me in order to fulfill my obsession.

I cannot thank my friend enough for his help in getting me a 3D Printer. I look forward to getting it running and attempting my first 3D Printing of… pretty much anything. Which will probably be a test print to level the bed.

But who cares? I now possess a 3D printer! Let’s get this thing making stuff!

3D Printer- Part 1: The Obsession

I’ve been wanting to buy a 3D Printer for a few years now. I even became convinced that I could justify its existence in my life. Hey honey- Looks like I’ll need to reprint more flower pots! I’ll have that ready in about a week. But why don’t I just hit the Home Depot and spend $2 on some?

Once I almost spent some money on a pancake printer! What the heck is wrong with me? I know- it’s the excitement of making something out of almost nothing is kinda cool. Just an image in a program, some heated plastic and a few hours later- there it is: a plastic replica of something.

3D Printers have gotten better lately. After years of obsessing, studying and watching every video review- I think it may be time to get one. The model I want is the CR-10. It looks like a good printer with good reviews and a decent price point. My only worries- I’ll get bored and have an expensive paperweight or it will end up as annoying as a regular printer.

You know what I’m talking about. The paper printer at work that randomly stops working. Or the printer at home that refuses to print in black and white because one of the ink toners is low. I imagine that it could get frustrating partway through a 3D print only to have it flake out towards the end. Troubleshooting things like that are the part that makes me leery about going too cheap.

But hey, maybe I could print off my own 3D money in the end!